Tomoe Onoda, Takumi Ito, Kenjiro Mori, Hiromu Fuse and Changhoon Choi
Recently, there have been many discussions about repairability for damaged building structures after severe disasters. In japan, a technical manual for repairing damaged buildings has been established; however, its repair abilities have not been reported sufficiently. In this study, the Box-Shaped Repair Method which has been suggested on Japanese technical guideline is adopted for the damaged steel members, and its applicability and feasibility are investigated experimentally. Herein, the damaged portion on steel member such as plastic hinge or local buckling occurrence is covered with steel plate by welding. So the loading test is performed as parameters with section size of steel members, thickness of cover plate and welding size during repair process, and loading path. The procedure of this study is as follows; the first, the damaged test specimens of H-shaped steel member with local buckling are reproduced by initial loading test. Next, the damaged specimens with plastic residual deformation are returned to the original position. Finally, the loading test is done after repair. From test results, it is confirmed that the fundamental structural performance such as the rigidity, maximum strength, and absorbed energy after repair are improved by comparison of original state. And also, this performance can be controlled by adjusting the thickness of cover plate and welding condition. Furthermore, from the observation of test results, the analytical model of repaired steel member is suggested. From the comparison of test results, it can be said that the proposed model shows good agreements both test results and theoretical figure.
Comparte este artículo
English 
Chinese 
Russian 
German 
French 
Japanese 
Portuguese 
Hindi 